View NL4827HC19-05A_6170816.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document number: dod-pp-0397 (2nd edition) published date: october 2007 cp(n) ? nec lcd technologies, ltd. 2007 all rights reserved. 1 this preliminary data sheet is updated document from dod-pp-0360(1). all information is subject to change without notice. please confirm the sales representative before starting to design your system. tft color lcd module NL4827HC19-05A 11cm (4.3 type) wqvga preliminary data sheet dod-pp-0397 (2nd edition) www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 2 introduction the copyright to this document belongs to nec lcd technologies, ltd. (hereinafter called "nec"). no part of this document will be used, reproduced or copied without prior written consent of nec. nec does and will not assume any liability for infringement of patents, copyrights or other intellectual property rights of any third party arising out of or in connection with application of the products described herein except for that directly attributable to mechanisms and workmanship thereof. no license, express or implied, is granted under any patent, copy right or other intellectual property right of nec. some electronic parts/components would fail or malfunction at a certain rate. in spite of every effort to enhance reliability of products by nec, the possibility of failures and malfunction might not be avoided entirely. to prevent the risks of damage to death, human bodily injury or other property arising out thereof or in connection therewith, each customer is re quired to take sufficient measures in its safety designs and plans including, but not limited to, redundant system, fire-containment and anti-failure. the products are classified into three quality grades: "standard" , "special" , and "specific" of the highest grade of a quality assurance program at the choice of a customer. each quality grade is designed for applications described below. any customer who intends to use a product for application other than that of standard quality grade is required to contact an nec sales representative in advance. the standard quality grade applies to the products developed, designed and manufactured in accordance with the nec standard quality assurance pr ogram, which are designed for such application as any failure or malfunction of the products (sets) or parts/components incorporated therein a customer uses are, directly or indirectly, free of any damage to death, human bodily injury or other property, like general electronic devices. examples: computers, office automation equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment, industrial robots, etc. the special quality grade applies to the products developed, designed and manufactured in accordance with an nec quality assurance program stricter th an the standard one, which are designed for such application as any failure or malfunction of the products (sets) or parts/components incorporated therein a customer uses might directly cause any damage to d eath, human bodily injury or other property, or such application under more severe condition than that defined in the standard quality grade without such direct damage. examples: control systems for transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, medical equipment not specifically designed for life support, safety equipment, etc. the specific quality grade applies to the products developed, designed and manufactured in accordance with the standards or quality assurance program de signated by a customer who requires an extremely higher level of reliability and quality for such products. examples: military systems, aircraft control equipm ent, aerospace equipment, nuclear reactor control systems, medical equipment/devices/systems for life support, etc. the quality grade of this product is the "standard" unless otherwise specified in this document. www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 3 contents introduct ion ................................................................................................................... ................................... 2 1. outline..................................................................................................................... ........................................... 4 1.1 structure and princi ple .................................................................................................... .............. 4 1.2 application................................................................................................................ ............................... 4 1.3 features ................................................................................................................... ................................. 4 2. general sp ecificat ions ...................................................................................................... ...................... 5 3. block diag ram ............................................................................................................... ................................ 6 4. detailed sp ecificat ions ..................................................................................................... ...................... 8 4.1 mechanical specifica tions.................................................................................................. ............ 8 4.2 absolute m aximum ratings ................................................................................................... ......... 8 4.3 electrical characteristics................................................................................................. .......... 9 4.4 power supply vol tage sequence .............................................................................................. .... 9 4.5 interface pi n connect ions .................................................................................................. .......... 10 4.6 display colors and input data signals .................................................................................. 12 4.7 display positi ons.......................................................................................................... ....................... 13 4.8 scanning di rections ........................................................................................................ ................. 13 4.9 input si gnal ti mings....................................................................................................... ................... 14 4.10 optical characteristics ................................................................................................... ........... 18 5. reliability tests ........................................................................................................... ............................. 20 6. pre cautio ns ................................................................................................................. .................................. 21 6.1 meaning of caution signs ................................................................................................... ........... 21 6.2 cautions ................................................................................................................... ............................... 21 6.3 attentions ................................................................................................................. ............................. 21 6.3.1 handling of the product.................................................................................................. ................... 21 6.3.2 environment .............................................................................................................. ........................ 22 6.3.3 characteristics .......................................................................................................... ......................... 22 6.3.4 other .................................................................................................................... .............................. 22 7. outline drawing s ............................................................................................................ ........................... 23 revision history ............................................................................................................... .............................. 24 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 4 1. outline 1.1 structure and principle color lcd module NL4827HC19-05A is composed of th e amorphous silicon thin film transistor liquid crystal display (a-si tft lcd) panel structure with dr iver lsis for driving the tft (thin film transistor) array, and a backlight. the a-si tft lcd panel structure is injected liquid crystal material into a narrow gap between the tft array glass substrate and a color-filter glass substrate. color (red, green, blue) data signals from a host system (e.g. signal generator, etc.) are modulated into best form for active matrix system by a controller, and sent to the driver lsis which drive the individual tft arrays. the tft array as an electro-optical switch regulates the amount of transmitted light from the backlight assembly, when it is controlled by data signals. color images are created by regulating the amount of transmitted light through the tft array of red, green and blue dots. 1.2 application ? personal navigation device 1.3 features ? transmissive type ? backlight attached ? high luminance ? high contrast ? including lcd controller and power supply ? 8 - bit digital rgb signals www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 5 2. general specifications display area 95.04 (h) 53.856 (v) mm diagonal size of display 11cm (4.3 inches) drive system a-si tft active matrix display color 16,777,216 colors pixel 480 (h) 272 (v) pixels pixel arrangement rgb (red dot, green dot, blue dot) vertical stripe dot pitch 0.066 (h) 0.198 (v) mm pixel pitch 0.198 (h) 0.198 (v) mm module size 105.5 (h) 67.2 (v) 3.8 (d) mm (typ.) weight 51 (typ.) polarizer surface clear polarizer pencil-hardness 3h (min.) [by jis k5400] designed viewing direction viewing direction without image reversal: down side (6 o'clock) luminance at il= 20ma 600cd/m 2 (typ.) contrast ratio at il= 20ma 500:1 (typ.) color gamut at lcd panel center 60% (typ.) [against ntsc color space] response time ton+toff (10% 90%) 33ms (typ.) signal system 8-bit digital signals for data of rgb colors, dot clock (clk), de, horizontal synchronous signal (hsync), vertical synchronous signal (vsync), reset signal (/reset) supply voltage vcc: 3.0v (typ., for logic) vdd: 5.0v (typ., for lcd driver) power consumption lcd panel + driver: (125) mw (typ.) backlight: (512) mw (typ., at il= 20ma) 2 2 2 2 2 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 6 3. block diagram d20 to d27 d10 to d17 d00 to d07 clk vsync hsync de /reset disp drive r product (lcd panel + driver + backlight) lcd panel backlight vdd anode cathode power supply input backlight (example of connection) vcc 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 7 fpc i/f v driver h driver 1,440 lines lcd panel 272 lines h: 480 3 (r, g, b) v: 272 d00 to d07 d10 to d17 d20 to d27 vsync hsync de clk /reset disp test vcc vdd gnd anode1 cathode1 anode2 cathode2 11 to 18 19 to 26 27 to 34 8 7 5 9 6 39 40 41 2,3 1,4,10,35,42, 47 48 49 50 51 symbol pin no. +3.0v +5.0v backlight 2 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 8 4. detailed specifications 4.1 mechanical specifications parameter specification unit module size 105.5 0.3 (w) 67.2 0.3 (h) 3.8 0.3 (d) note1 note2 mm display area 95.04 (h) 53.856 (v) note2 mm weight 51 (typ.), 53 (max.) g note1: excluding fpc note2: see " 7. outline drawings ". 4.2 absolute maximum ratings parameter symbol rating unit remarks vcc - 0.3 to +6.0 supply voltage vdd - 0.3 to +6.0 v ta= 25 c logic input voltage vi - 0.3 to vcc+0.3 v logic signals reverse voltage vr 20 v power dissipation pd 492 mw ta= 25 c, these values are applied for both anode1 and 2. forward current il note1 ma - backlight pulse forward current ifp 100 ma pulse width 10ms, duty 1/10 storage temperature tst (-30 to +80) - operating temperature top -20 to +70 c product surface note2 95 ta 40 c 85 40 c 70 c storage altitude 13,600 m (-30 c ta 80 c) operating altitude 4,850 m -20 c ta 70 c note1: allowable forward current note2: measured at display area note3: no condensation note4: water amount at ta= 70c and rh= 36% allowable forward current [ma] ambient temperature ta [ c ] 0 5 10 15 20 25 30 35 40 0 20 40 60 80 100 tbd 2 2 2 2 2 2 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 9 4.3 electrical characteristics (1) logic/ lcd driving (ta= 25 c) parameter symbol min. ty p. max. unit remarks logic supply voltage vcc 2.3 3.0 3.6 v - lcd driver supply voltage vdd 4.8 5.0 5.2 v - logic input high voltage vih 0.7vcc - vcc v logic input low voltage vil 0 - 0.2vcc v logic signal vcc supply current icc - (4.0) tbd ma at vcc= 3.0v, vdd=5.0v note1 vdd supply current idd - (22.5) tbd ma at vcc= 3.0v, vdd=5.0v note1 note1: pphck=, (10.87)mhz, hsync= (20.7)khz, vsync= (75)hz checkered flag pattern (by eiaj ed-2522) (2) backlight (ta= 25 c) parameter symbol min. typ. max. unit remarks forward current il1, 2 - (20) tbd ma - forward voltage vl1, 2 - (12.8) 14 v at il= 20ma 4.4 power supply voltage sequence 2 2 2 2 2 2 2 <10frame valid period >90% vcc display signals note2 >1ms vdd reset disp lcd display (white) tbd tbd >10frame (white) 10frame >0 >0 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 10 note1: supply voltage sequence must be followed above sequence diagram. note2: display signals (clk, hsync, vsync, de, r0 to r7, g0 to g7, b0 to b7) must be low or high-impedance, exclude the valid period (see above sequence diagram), in order to avoid that internal circuits is damaged. note3: all signals should not be interrupted during th e operation. even if the signals recover, the lcd module may not be operated correctly. in this case, reset the sequence again. 4.5 interface pin connections cn1 (fpc) adaptable socket: (fh23-51s-0.3shw( 06)) (hirose electric co., ltd.(hrs)) pin no. symbols functions pin no. symbols functions 1 gnd ground note1 27 d20 red data (lsb) 2 vdd 28 d21 red data 3 vdd power supply 29 d22 red data 4 gnd ground note1 30 d23 red data 5 de data enable signal 31 d24 red data 6 /reset reset 32 d25 red data 7 hsync horizontal synchr onous signal 33 d26 red data 8 vsync vertical synchronous signal 34 d27 red data (msb) 9 clk dot clock 35 gnd ground note1 10 gnd ground note1 36 rsvd keep this pin open. 11 d00 blue data (lsb) 37 rsvd keep this pin open. 12 d01 blue data 38 rsvd keep this pin open. 13 d02 blue data 39 disp display on/off 14 d03 blue data 40 test keep this pin h. 15 d04 blue data 41 vcc power supply (logic) 16 d05 blue data 42 gnd ground note1 17 d06 blue data 43 n. c. keep this pin open. 18 d07 blue data (msb) 44 n. c. keep this pin open. 19 d10 green data (lsb) 45 n. c. keep this pin open. 20 d11 green data 46 n. c. keep this pin open. 21 d12 green data 47 gnd ground note1 22 d13 green data 48 anode1 led1 voltage (anode) 23 d14 green data 49 cathode1 led1 voltage (cathode) 24 d15 green data 50 anode2 led2 voltage (anode) 25 d16 green data 51 cathode2 led2 voltage (cathode) 26 d17 green data (msb) note1: all gnd terminals should be used without any non-connected lines. note2: do not fold the fpc. when the fpc is fold ed, pattern disconnection may be caused. in case of bending fpc, the minimum curvature (r) must be more than 1.0 mm. 2 2 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 11 description of terminals terminals description /reset when /reset is l, an internal reset is performed. the reset operation is executed at the /reset signal level. be sure to perform reset via this pin at power application. disp display on/ off mode control. internally pulled high. when disp is l, input data is invalid and display off (white). anode, cathode refer to the below ? circuits of backlight ?. 2 2 circuits of backlight led cathode1 anode1 led cathode2 anode2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 12 4.6 display colors and input data signals this product can display equivalent of 16,777,216 colors in 256 gray scales by combination. also the relation between display colors and input data signals is as the following table. data signal (0: low level, 1: high level) display colors r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 basic colors black blue red magenta green cyan yellow white 00000000 00000000 11111111 11111111 00000000 00000000 11111111 11111111 00000000 00000000 00000000 00000000 11111111 11111111 11111111 11111111 00000000 11111111 00000000 11111111 00000000 11111111 00000000 11111111 red gray scale black dark bright red 00000000 00000001 00000010 : : 11111101 11111110 11111111 00000000 00000000 00000000 : : 00000000 00000000 00000000 00000000 00000000 00000000 : : 00000000 00000000 00000000 green gray scale black dark bright green 00000000 00000000 00000000 : : 00000000 00000000 00000000 00000000 00000001 00000010 : : 11111101 11111110 11111111 00000000 00000000 00000000 : : 00000000 00000000 00000000 blue gray scale black dark bright blue 00000000 00000000 00000000 : : 00000000 00000000 00000000 00000000 00000000 00000000 : : 00000000 00000000 00000000 00000000 00000001 00000010 : : 11111101 11111110 11111111 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 13 4.7 display positions the following table is the coordinates per pixel (see figure of " 4.8 scanning directions ".). c (0, 0) c (1, 0) r g b r g b c( 0, 0) c( 1, 0) ? ? ? c( x, 0) ? ? ? c(478, 0) c(479, 0) c( 0, 1) c( 1, 1) ? ? ? c( x, 1) ? ? ? c(478, 1) c(479, 1) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? c( 0, y) c( 1, y) ? ? ? c( x, y) ? ? ? c(478, y) c(479 y) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? c( 0, 270) c( 1, 270) ? ? ? c( x, 270) ? ? ? c(478, 270) c(479, 270) c( 0, 271) c( 1, 271) ? ? ? c( x, 271) ? ? ? c(478, 271) c(479, 271) 4.8 scanning directions the following figures are seen from a front view. also the arrow shows the direction of scan. note1: meaning of c (x, y) and d (x, y) c (x, y): the coordinates of the display position (see " 4.7 display positions ".) d (x, y): the data number of input signal for lcd panel c (0, 0) d (0, 0) c (0, 271) d (0, 271) c (479, 271) d (479, 271) c (479, 0) d (479, 0) fpc www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 14 4.9 input signal timings rgb interface (ta= 25 c, vcc= 3.0v, vdd=5.0v) (1) timing characteristics parameter symbol min. typ. max. unit remarks frequency 1/tc (8.69) (10.87) tbd mhz - duty tcd 0.4 0.5 0.6 - clk rise time, fall time tcrf - - (2) ns - setup time tds 15 - - ns clk-data hold time tdh 15 - - ns data (d00-05) (d10-15) (d20-25) rise time, fall time tdrf - - (2) ns - setup time tdes 15 - - ns clk-de hold time tdeh 15 - - ns de rise time, fall time tderf - - (2) ns - tbd (48.3) (60.4) s (20.7)khz (typ.) cycle th (525) clk display period thd 480 clk front-porch thf (2) clk pulse width thp (2) (41) - clk back-porch thb (2) clk setup time ths 15 - - ns clk- hsync hold time thh 15 - - ns hsync rise time, fall time thrf - - (2) ns - tbd (13.33) (16.67) ms (75)hz (typ.) cycle tv (276) h display period tvd 272 h front-porch tvf (1) h pulse width tvp (1) (2) - h back-porch tvb (1) h setup time tvhs 15 - - ns vsync- hsync hold time tvhh 15 - - ns vsync rise time, fall time tvrf - - (2) ns - setup time tdiss 15 - - ns disp- vsync hold time tdish 15 - - ns disp rise time, fall time tdisrf - - (2) ns - note1: definition of parameters is as follows. tc= 1clk, tcd= tch/tc, th= 1h note2: all parameters should be kept within the specified range. 2 2 2 2 2 2 2 2 2 2 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 15 (2) input signal timing chart note1: unless otherwise specified, the input level is defined to be vih= 0.7vcc, vil= 0.3vcc. (note: x=0 to 479) 1 hsync hsync hsync vsync 2 3 data (d00-07) (d10-17) (d20-27) d(x,0) d(x,270)d(x,271) d(x,y) invalid invalid 1 d(0,y)d(1,y) d(x,y) d(478,y)d(479,y) invalid invalid (3)h (fixed) 272h (fixed) 1h tvp tvb tvd tvf (1) h (fixed) data (d00-07) (d10-17) (d20-27) tv de de de 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 16 clk hsync (note: y = 0 to 271) 2 1 1 d(0,y)d(1,y) d(479,y) invalid invalid 1clk 43clk (fixed) 480clk (fixed) thp thb thd thf 2clk (fixed) data (d00-07) (d10-17) (d20-27) th de tdrf 0.7vcc 0.3vcc tch invalid clk data (d00-07) (d10-17) (d20-27) tds tdh tc 0.7vcc 0.3vcc tdrf tcrf tcrf tderf de tdes tdeh 0.7vcc 0.3vcc tderf 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 17 note1: unless otherwise specified, the input level is defined to be vih= 0.7vcc, vil= 0.3vcc. thh hsync ths clk 0.7vcc 0.3vcc 0.7vcc 0.3vcc thrf thrf 2 2 hsync vsync tvhs 0.7vcc 0.3vcc 0.7vcc 0.3vcc tvrf tvhh vsync disp tdiss 0.7vcc 0.3vcc 0.7vcc 0.3vcc tdisrf tdish 2 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 18 4.10 optical characteristics (note1, note2) parameter condition symbol min. typ. max. unit remarks luminance white at center r= 0 , l= 0 , u= 0 , d= 0 l tbd 600 - cd/m 2 - contrast ratio white/black at center r= 0 , l= 0 , u= 0 , d= 0 cr 300 500 - - note3 luminance uniformity white r= 0 , l= 0 , u= 0 , d= 0 maximum luminance: 100% lu 70 80 - % note4 reference data (note1, note2) parameter condition symbol min. typ. max. unit remarks wx - tbd - - chromaticity coordinates white wy - tbd - - color gamut r= 0 , l= 0 , u= 0 , d= 0 at center, against ntsc color space c 50 60 - % note5 white to black 90% 10% ton - 8 - response time black to white 10% 90% toff - 25 - ms note6 note7 right u= 0 , d= 0 , cr 10 r - 60 - left u= 0 , d= 0 , cr 10 l - 60 - up r= 0 , l= 0 , cr 10 u - 60 - viewing angle down r= 0 , l= 0 , cr 10 d - 40 - - note1: measurement conditions are as follows. ta= 25 c, vcc= 3.0v, vdd= 5.0v, il= 20ma, with touch panel note2: definition of viewing angles photodetector ( lcd5200 or sr-3 ) product upper lower left upper lower n ormal axis (perpendicular) u d r l 12 o?clock right fpc 2 2 2 2 2 www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 19 note3: definition of contrast ratio the contrast ratio is calculated by using the following formula. luminance of white screen luminance of black screen note4: definition of luminance uniformity luminance uniformity is calculated by using the following formula. note5: the white chromaticity coordinates are deviated by the led deviation in addition to color filter deviation. note6: definition of response times response time is measured, the luminance changes from "white" to "black", or "black" to "white" on the same screen point, by photo-detector. ton is the time it takes the luminance change from 90% down to 10%. also toff is the time it takes the luminance change from 10% up to 90% (see the following diagram.). note7: product surface temperature: top= 25 c 1/6 1/2 5/6 1/6 1/2 5/6 a b c d e f g h i minimum luminance from a to i maximum luminance from a to i luminance uniformity (lu) = 100 100% 90% 10% 0% ton toff luminance white black contrast ratio (cr) = www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 20 5. reliability tests (note1) test item condition judgment high temperature and humidity (operation) 60 r 2 q c, rh= 90%, 240 hours display data is black. heat cycle (operation) -20 r 3 q c } 1 hour 70 r 3 q c } 1 hour 50 cycles, 4 hours/cycle display data is black. thermal shock (non operation) ( -30) r 3 q c } 30 minutes (80) r 3 q c } 30 minutes 100 cycles, 1 hour/cycle temperature transition tim e is within 5 minutes. low pressure (non operation) 15kpa ( -30) r 3 q c } 24 hours ( 80) r 3 q c } 24 hours low pressure (operation) 53.3kpa -20 r 3 q c } 24 hours 7 0 r 3 q c } 24 hours esd (operation) 150pf, 150 : , r 10kv 3 places on a panel surface 10 times each places at 1 sec interval dust (operation) sample dust: no. 15 (by jis-z8901) 15 seconds stir 8 times repeat at 1 hour interval no display malfunctions vibration (operation) 30 to 100hz, 19.6m/s 2 (2g) 30 minutes/cycle x, y, z direction 1 times each directions mechanical shock (non operation) 3,920m/s 2 , 2.5ms x, r y, r z direction 1 times each directions no display malfunctions no physical damages note1: display and appearance are checked under environmental conditions equivalent to the inspection conditions of defect specifications. www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 21 6. precautions 6.1 meaning of caution signs the following caution signs have very important meaning. be sure to read "6.2 cautions" and "6.3 attentions", after und erstanding these contents! ! this sign has the meaning that customer w ill be injured by himself or the product will sustain a damage, if customer has wrong operations. this sign has the meaning that customer will ge t an electrical shock, if customer has wrong operations. this sign has the meaning that customer will be injured by himself, if customer has wrong operations. 6.2 cautions ? do not touch the working backlight. ther e is a danger of an electric shock. ? do not touch the working backlight. there is a danger of burn injury. ? do not shock and press the l cd panel and the backlight! ther e is a danger of breaking, because they are made of glass. (shock: to be not greater 3,920m/s 2 and to be not greater 2.5ms) 6.3 attentions ! 6.3.1 handling of the product p take hold of both ends without touching the fpc when the product (lcd module) is picked up from the tray. q do not hook nor pull the fpc in order to avoid any damage. r when the product is put on the table temporar ily, display surface must be placed downward. s when handling the product, take the measures of electrostatic discharge with such as earth band, ionic shower and so on, because the product may be damaged by electrostatic. t the product must be installed and/or handled without any stress such as bends or twist. bends, twist or any stress to any portion may cause display failures. and also do not put heavy or hard materials on the product. u do not hit or rub the surface of touch panel with hard materials, because it is easily scratched. (polarizer pencil-hardness: 3h) v when cleaning the t/p surface, wipe it with a soft dry cloth. w do not push nor pull the fpc while the product is working. x do not fold the fpc. when the fpc is folded, pattern disconnection may be caused. in case of bending fpc, the minimum curvature (r) must be more than 1.0 mm. y when installing the product, do not contact a conductor such as a metal to the fpc excluding the terminal area. there is a risk of short circuit wh ich is caused by breakage of insulation layer of the fpc. www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 22 ? when installing the product, apply the waterproof design to avoid going of water into the product. ? if the product is subjected to direct sunlight for a long time, touch panel transmission may be degraded. 6.3.2 environment do not operate or store in high temperature, hi gh humidity, dewdrop atmosphere or corrosive gases. keep the product in packing box with antistatic pouc h in room temperature to avoid for dusts and sunlight, when storing the product. in order to prevent dew condensation occurring by temperature difference, the product packing box should be opened after enough time being left under the environment of an unpacking room. evaluate the leaving time sufficiently because a situation of dew condensation occurring is changed by the environmental temperature and humidity. (recommended leaving time: 6 hours or more with packing state) do not operate in high magnetic field. circuits may be broken down by it. this product is not designed as radiation hardened. 6.3.3 characteristics the following items are neither defects nor failures. response time, luminance and color may be changed by ambient temperature. display mura, flicker, vertical seam or small spot may be observed depending on display patterns. do not display the fixed pattern for a long time because it may cause image sticking. optical characteristics may be changed depending on input signal timings. 6.3.4 other all gnd terminals should be used without any non-connected lines. do not disassemble the product. pack the product with original shipping package, in order to avoid any damages during transportation, when returning the product to nec. www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 23 7. outline drawings unit: mm note1: the values in parentheses are for reference. note2: when installing the product to the customer equipment, do not apply any stress to rear side of the product, fpc, solderi ng area and mounting area. if not, it may cause display mura or break down of the product. note3: while the product is working, do not contact a conductor such as a metal to the soldering area and mounting area of the fpc. pin no. symbol pin no. symbol 1 gnd 26 d17 2 vdd 27 d20 3 vdd 28 d21 4 gnd 29 d22 5 de 30 d23 6 /reset 31 d24 7 hsync 32 d25 8 vsync 33 d26 9 clk 34 d27 10 gnd 35 gnd 11 d00 36 rsvd 12 d01 37 rsvd 13 d02 38 rsvd 14 d03 39 disp 15 d04 40 test 16 d05 41 vcc 17 d06 42 gnd 18 d07 43 n. c. 19 d10 44 n. c. 20 d11 45 n. c. 21 d12 46 n. c. 22 d13 47 gnd 23 d14 48 anode1 24 d15 49 cathode1 25 d16 50 anode2 51 cathode2 2 (3.0) bending area terminal side 5.10.5 mounting area (tbd max.) 15.60.05 2.90.1 (31.678) (53.1) 15.60.05 (15) 95.04 (display area) 4.750.5 53.856 (display area) (8.594) (4.88) 5.580.5 0.30.07 3.50.3 0.30.02 0.60.02 15.00.03 (pitch 0.3mm) 15.60.05 51 1 0.50.1 2-r0.5 4.50.5 (1.5) tbd tbd 3.80.3 3.8 0.20.03 105.50.3 67.20.3 solding area(4.9max.) (20.7) a 51 detail b stiffener b not including fpc detail a adaptable connecter:hirose fh23-51s-0.3shw(06) (product outline) (product outline) www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 24 revision history the inside of latest specifications is revised to th e clerical error and the ma jor improvement of previous edition. only a changed part such as functions, characteristic value and so on that may affect a design of customers, are described especially below. edition document number prepared date revision contents and signature 1st edition dod-pp- 0360 sep. 3, 2007 revision contents new issue 2nd edition dod-pp- 0397 oct. 15, 2007 revision contents p5 general specifications ? module size: 105.5 (h) 67.2 (v) tbd (d)mm (typ.) 105.5 (h) 67.2 (v) 3.8 (d)mm (typ.) ? weight: tbd 51 g (typ.) ? luminace: 550cd/m 2 (typ.) 600cd/m 2 (typ.) ? response time: 25ms (typ.) 33ms (typ.) ? supply voltage-vcc: 2.5v 3.0v (typ.) ? power consumption ? lcd panel + driver: tbd (typ.) (125)mw (typ.) ? backlight: tbd (typ.) (512)mw (typ.) p6-7 block diagram ? disp (addition) ? pin no.39,40 (addition) ? vcc: +2.5v +3.0v p8 mechanical specifications ? module size: 105.5 0.3 (w) 67.2 0.3 (h) tbd 0.3 (d)mm (typ.) 105.5 0.3 (w) 67.2 0.3 (h) 3.8 0.3 (d)mm (typ.) ? weight: tbd 51g (typ.), 53g (max.) p8 absolute maximum ratings ? backlight: vr: 25 20 (v), pd: 615 492 (mw) ? relative humidity: 36 ( %) (addition) ? absolute humidity remarks: ta > 60 c ta > 70 c ? note4: ta= 60c and rh= 55% ta= 70c and rh= 36% p9 logic/ lcd driving ? vcc: tbd (min.), 2.5 (typ.), tbd (max.) 2.3 (min.) 3.0 (typ.), 3.6 (max.) (v) ? vdd: tbd (min.),tbd (max.) 4.8 (min.), 5.2 (max.) (v) ? vih: 0.8vcc 0.7vcc (v), vil: 0.2vcc 0.3vcc (v) ? icc: tbd (typ.) (4.0) (typ.) (ma), remarks: vcc: 2.5v 3.0v ? idd: tbd (typ.) (22.5) (typ.) (ma), remarks: vcc: 2.5v 3.0v ? note1: t pphck= 8.69mhz, hsync= 16.56khz, vsync= 60hz pphck= (10.87)mhz, hsync= (20.7)khz, vsync= (75)hz p9 backlight ? forward voltage: (16.0) (typ.), tbd (max.) 12.8 (typ.), 14 (max.) (v) p9-10 power supply voltage sequence ? diagam (revision) ? note1 (change), note2 (addition) p10 interface pin connections ? pin no.39: rsvd disp, pin no.40: n.c. test p11 description of terminals ? disp (addition) ? circuits of backlight (revision) p14 input signal timing ? vcc= 2.5v vcc= 3.0v prepared by approved by e. katayama checked by writer t. ogawa www.datasheet.co.kr datasheet pdf - http://www..net/
NL4827HC19-05A preliminary data sheet dod-pp-0397 (2nd edition) 25 revision history edition document number prepared date revision contents and signature 2nd edition dod-pp- 0397 oct. 15, 2007 revision contents p14 timing characteristics ? clk-frequency: tbd (min.), 8.69 (typ.) (8.69) (min.), (10.87) (typ.) (mhz) rise time, fall time: tbd (max.) (2) (max.) (ns) ? data-rise time, fall time: tbd (max.) (2) (max.) (ns) ? de-rise time, fall time: tbd (max.) (2) (max.) (ns) ? hsynk-cycle: 60.4 (typ.), tbd (max.) (48.3) (typ.), (60.4) (max.) ( s) remarks: 16.56 khz (20.7) khz rise time, fall time: tbd (max.) (2) (max.) (ns) ? vsynk-cycle: 16.59 (typ.), tbd (max.) (13.33) (typ.), (16.67) (max.) (ms) remarks: 60 hz (75) hz rise time, fall time: tbd (max.) (2) (max.) (ns) ? vsync-hsync timing vsync-hsync: setup time, hold time (revision) ? disp (addition) p15-17 input signal timing chart ? vih: 0.8vcc 0.7vcc (v), vil: 0.2vcc 0.3vcc (v) ? hsync-vsync (revision) ? vsync-disp (addition) p18 optical characteristics ? luminace: 550cd/m 2 (typ.) 600cd/m 2 (typ.) ? luminace uniformity: 60 (min.) 70 (min.) (%) ? response time: ton: tbd (typ.) 8 (typ.)(ms), toff: tbd (typ.) 25 (typ.)(ms) ? viewing angle: r, l: 50 (typ.) 60 (typ.) ( ), u: 70 (typ.) 60 (typ.) ( ) ? note1: vcc= 2.5v vcc= 3.0v p23 outline drawings is revised. t. ogawa checked by si g nature of writer t. ogawa approved by prepared by www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of NL4827HC19-05A

	To Download NL4827HC19-05A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .